PrintICOSUN Installation Process
Important points to consider during Specification and Installation
- Roof slope should be designed to 1:40 minimum to ensure no ponding water and effective cleaning of the PVL modules.
- Maximum roof slope 40 degrees.
- Plan the location of the PVL modules to avoid shade from upstands, chimneys, nearby buildings, trees etc.
- Define the energy scheme based upon the usable roof space available.
- In retrofit situations ensure stability and rigidity of the existing waterproofing system
Typical layout of the ICOSUN system
Two runs of ICOSUN (0.4m wide) will fit per width of ICOSUN waterproofing (1.0m wide)
Application of PVL Photovoltaic Laminate Module
 |
 |
 |
 |
KSK primer is applied |
ICOSUN PVL is rolled into position. |
The PVL module has a self adhesive underside which
is easily and securely bonded to the surface of the primed ICOSUN membranes |
Pressure is applied during the application process using a roller to achieve a good seal. |
|